Car Maintenance 101: How to Keep Your Auto Battery in Tiptop Shape

Battery problems seem to be one of the most popular auto concerns for drivers around the world. While most of the tips listed below may be “common knowledge” for the great majority of drivers out there, it’s good to be reminded once in a while on what you can do to help keep your auto battery in great shape.

The older your auto, the more frequent you’ll have to replace your battery. While you can keep jump-starting a dead battery for some time, you’ll need to replace your old battery eventually. If it took your first auto battery two years before it finally became useless, your succeeding batteries would usually expire a little earlier compared to your first battery. Check your owner’s manual for recommendations on how often you need to replace your auto battery.

The best way to avoid having to jump-start your auto all the time or having to replace your battery frequently is by exercising proper auto battery maintenance. The following are some tips on how you can prolong your auto battery’s life.

Tip #1: If the main problem with your battery has to do with a faulty solenoid or alternator, then replace the busted auto part immediately. Sometimes the reason behind a malfunctioning battery isn’t damage on the battery itself. Since the alternator is responsible for re-charging and supporting your battery, a faulty alternator could cause your battery to break down frequently.

Tip #2: Before turning off your vehicle, make sure all your accessories are turned off as well. Leaving some of your auto accessories on, like your radio, windshield wipers or auto lights, can instantly drain your battery. Even something simple like a door left open can cause your auto cabin’s lights to switch on even if you’re already outside your vehicle. So avoid draining your battery by double-checking that all accessories are “off” before exiting your vehicle.

Tip #3: Follow the instructions and recommendations from the manufacturer regarding adding water to your battery. Some battery manufacturers recommend adding water directly on the cells. After replacing your auto battery, make sure you’ve browsed through (and thoroughly understood) the recommendations and instructions on how to add water to your auto battery.

Tip #4: Once in a while, ensure that your battery is securely in place. Sometimes faulty installation of a new auto battery can lead to damages on your battery and other parts of your vehicle. This happens when you fail to secure your battery firmly on its mount, and as a result, the battery begins to move around, working your cables loose and scratching or denting nearby auto components. If you find that your battery is loose, secure the battery by attaching the cables firmly and fastening the clamps.

Tip #5: Occasionally check the tautness of your fan belt. A loose fan belt can affect the battery’s ability to recharge completely or to keep its charge constant. If you have a loose fan belt, tighten it as soon as possible. If the fan belt is damaged beyond repair, then replace it immediately and make sure you install this auto component correctly.

Tip #6: Lastly, keep your battery and its surrounding areas clean. Corrosion on your battery terminals and a build-up of grime on your battery can cause this auto part to malfunction often. Prevent this by checking your battery and its terminals for signs of corrosion and dirt, and cleaning these areas out using a stiff brush and some rags.

Remember, the best way to avoid accidents and auto failure is by exercising regular and complete vehicle maintenance. Follow these tips to keep your battery performing at its best for a long time.


One Response to Car Maintenance 101: How to Keep Your Auto Battery in Tiptop Shape

  1. […] Source: Auto Mechanic | Auto Mechanic Repair and Maintenance Tips […]

%d bloggers like this: