Radiator Hose Replacement

The radiator is beyond doubt an essential part of your vehicle. Fulfilling a crucial part in the cooling process of the automotive system, the auto radiator is something your vehicle can never afford to lose.

In order for your radiator to deliver its task effectively, it must be properly connected to the engine of your vehicle. The link that binds the engine and the radiator is an automotive component called radiator hose. This radiator device, which is usually rubber-made, comes in different types. Some of the most common types are the accordion hose, molded hose, and the ordinary radiator hose.

Every vehicle owner should know the importance of the radiator hose. When this auto part fails to function properly, the engine is likely to overheat. No matter how sturdy a radiator hose is, it will be subjected to deterioration sooner or later. In view of that, it is best to change your automobile’s radiator hose once every four years. It is also essential to bring them to the experts for regular assessment.

On the other hand, there are occasions when your radiator hose will malfunction despite your efforts to provide it with optimum maintenance. Breakage and leaks are some of the signs that should prompt you to replace your radiator hose. As an ordinary vehicle owner, you might suppose that replacing the radiator hose of your vehicle is something that should not be done alone. That is a common misconception. There are some automotive procedures that you can entrust to your own hands. Replacing the radiator hose is a process far from being complicated. You just have to gain mastery of its basics.

  1. In changing your radiator hose, the first thing you have to do is bleed dry your radiator from its existing coolant. Using your dependable pliers, let loose of the pet cock located at the bottom of the radiator.
  2. When you are certain that the radiator has been totally freed from the old coolant, do not forget to tighten once again the pet cock.
  3. After entirely removing the old coolant, you can start getting rid of your defective radiator hose. First, undo the clamps of your radiator hose. Afterward, move them toward the center of the radiator hose. Then lightly pull the hose.
  4. You need to grease the interior of your new radiator hose before you put them in place.
  5. Grasp the new radiator hose tightly as you fasten its clamps.
  6. Replenish the radiator system with new coolant.

After correctly following these six easy steps, you can be assured that your vehicle will not suffer from overheating due to a defective radiator hose. You don’t really have to see a professional mechanic just to have your radiator hose replaced.


Comments are closed.

%d bloggers like this: